How to clone Cards



Naruto

Carding Novice
Joined
29.01.24
Messages
1
Reaction score
2
Points
1
Hi guys
I am fairly new and I’ve been trying to figure out how to clone.
so far I have a few live dump data and a MSRX6BT and blanks with and without chip.
Acan somebody help guide me on what’s the bare minimum requirement to start off with?

i don’t want to invest a lot out of pocket until making it work first
 

Makeit109

Carding Novice
Joined
22.01.24
Messages
19
Reaction score
0
Points
3
Hi guys
I am fairly new and I’ve been trying to figure out how to clone.
so far I have a few live dump data and a MSRX6BT and blanks with and without chip.
Acan somebody help guide me on what’s the bare minimum requirement to start off with?

i don’t want to invest a lot out of pocket until making it work first
Inbox me your telegram. Let’s partner
 

Kronicwest

Carding Novice
Joined
29.01.24
Messages
18
Reaction score
1
Points
3
Hey guy I also need help I bought a lot of dumps and it didn’t work it was 201 with pin track 2 I only made loss can someone help me out ? I appreciate it thanks guys 🫡
 

glockzhi

Carding Novice
Joined
12.01.24
Messages
13
Reaction score
1
Points
3
Hey guy I also need help I bought a lot of dumps and it didn’t work it was 201 with pin track 2 I only made loss can someone help me out ? I appreciate it thanks guys 🫡
ur not gonna hit
 

goodburger

Active Carder
Joined
27.01.24
Messages
26
Reaction score
3
Points
3
Hey guy I also need help I bought a lot of dumps and it didn’t work it was 201 with pin track 2 I only made loss can someone help me out ? I appreciate it thanks guys 🫡
write it with the msr and try to swipe in store or at old ass atms
 

moneyman2k

Active Carder
Joined
26.01.24
Messages
53
Reaction score
16
Points
8
Oh okay can I help me. ?
Hi guys
I am fairly new and I’ve been trying to figure out how to clone.
so far I have a few live dump data and a MSRX6BT and blanks with and without chip.
Acan somebody help guide me on what’s the bare minimum requirement to start off with?

i don’t want to invest a lot out of pocket until making it work first
All u need is a MSR, MSR software, and 101 blacks to cashout
 

moneyman2k

Active Carder
Joined
26.01.24
Messages
53
Reaction score
16
Points
8
have you tried at atms? what dump sites you buying from?

where do you put the pin from the dump while re writing the mag strip?
No we're once u write the new card up your good to go, the pins basically code to the magnetic stripe too

I don't use a site I get them freshly skimmed, but my cousin uses Brian's club and he said majority of his pieces hit
 
Top Bottom