CARDPEEK ERROR READING CLONED CARD AFTER BURN IT FROM X2 2020

[plenko]

Hi

I try clone a track2 card with x2 arc 2020, then when i check in cardpeek i get error 0141 backtrace: called at string "emv.lua"

1) EMV tab then CREDIT:
track2: 4517650631796737=24082212060000000000
track1: 24082211000000206000000
Mr xxxxx xxx
VISA DEBIT
AID: 41010
CURR CODE: 0032
COUNT CODE: 0032
PIN: 1820
EFEC DATE: 201030
EXP DATE: 241030

2) IST generate:
Read card from previous card data added in EMV tab and save a IST as visa37dda

3) IST load:
I load the previous IST generated, add the data of EMV tab plus the ARQC CA3663C5AE4FF30F in arqc1, arqc2 and arqc3 (generated from Bptools)
Then BURN card and it is finished

Cardpeek give me error when i read all my cloned cards..
What is telling me error 0141 backtrace: called at string "emv.lua" ?
What steps am I doing wrong?

 

[Goryoshin]

There can be many problems and CardPeek can be broken. Just re-install it and see if it works, or try your own card to read.
What kind of blank card do you use? and is it initialised/ formatted?

 

[plenko]

Yes, if I try to read my own prepaid card there are not errors.
Before clone card with the above mentioned steps, i delete Jcop files card and format with SDA chip emv writer by paws, then i read the formated card with Carpeek
My cards are J2A080.

My cardpeek is 0.8.4 installer and i use win10pro

 

[Deleted member 18106]

Hey Hey i dont know a lot about this stuff but i think this is not the good AID your have 41010 this is for mastercard so i think this is normal is dont working
try this for AID 31010
and do you have telegram ?? i will try to help you.

 

[plenko]

I though 41010 shoul be for atm, i also tried with AID 31010 and the error this time is 0066 ERROR backtrace: called at [string "emv.lua"]
my telgam is @flupstown

 

[Emv1sland]

did you do the ATR first ?

Yes, if I try to read my own prepaid card there are not errors.
Before clone card with the above mentioned steps, i delete Jcop files card and format with SDA chip emv writer by paws, then i read the formated card with Carpeek
My cards are J2A080.

My cardpeek is 0.8.4 installer and i use win10pro

 

[plenko]

what ATR you mean?

I just follow the next steps:

1) Delete and Format Jcop files of my blank card with SDA emv chip writer
2) Read the J2A080 formatted with Cardpeek
3) In X2 EMV tab i add the dump data then CREDIT:
track2: 4517650631796737=24082212060000000000
track1: 24082211000000206000000
Mr Fuk*ng Cloner
Visa Debit
AID: 31010
CURR CODE: 0032
COUNT CODE: 0032
PIN: 1820
EFEC DATE: 201030
EXP DATE: 241030
4) IST generate:
Read card from previous card data added in EMV tab and save a IST as visa37dda (also i tried generating the IST file from other real card)
5) IST load:
I load the previous IST generated, add the data of EMV tab plus the ARQC CA3663C5AE4FF30F in arqc1, arqc2 and arqc3 generated from Bptools (also i tried other method generating 3 differents ARQC1, ARQC2 and ARQC3). Then BURN card and it is finished
6) I remove card and insert again in omnikey 3121 to re-read card with Cardpeek and got ERROR emv.lua
NOTE: The equivalent track2 data tag 57 is detected but the card stops reading when comes the emv.lua error

I think, the issues are:
- I should use J2A040 of 36k or 40k instead of my J2A080 80k
- Or my x2 software is fake

 

[Goryoshin]

For AID you can use EFTLAB's listing, corresponding to your type of card:
https://www.eftlab.com/knowledge-base/211-emv-aid-rid-pix/

 

[plenko]

thanks but is not about AID problem, could be required get J2A040 40k unfused cards and maybe match the ATR... or? Maybe all emv software is fake and not work to calculate the right ARQC?

 

[Goryoshin]

Yeah, I know what u mean. My guess is X2 does write your card to some degree, when comparing an original card with a burnt X2 one. And true, the ARQCs have to be at the bank's side to be compared. Calculating the ARQCs also must be calculated at the right date. You can use it only once and if the owner uses it before you, it doesn't seem to work either. So, all in all.. An intriguing and difficult area.

Others say it isn't possible at all to clone a card coz you ought to have the unique keys to the ICC.

 

[plenko]

Yeah, I know what u mean. My guess is X2 does write your card to some degree, when comparing an original card with a burnt X2 one. And true, the ARQCs have to be at the bank's side to be compared. Calculating the ARQCs also must be calculated at the right date. You can use it only once and if the owner uses it before you, it doesn't seem to work either. So, all in all.. An intriguing and difficult area.

Others say it isn't possible at all to clone a card coz you ought to have the unique keys to the ICC.

So all about emv chip cloning is fake?

Keys of ICC kek dek mak?

No way to clone emv chip, you should find a dump BIN of your city and get a card of same branch office bank to get the right ATR, also if you are able to get the right arqc still if the owner used the card of your dump minutes before you then your arqc will not work..
And do you know some way to know the ARQC of my own card? What software?

 

[Goryoshin]

Exactly! You're right!

Ehm, for all I know there are two tools for that: BP-Tools and arqc_gen.exe (Mastercard emv decrypt), both free. If u need, let me know.

 

[plenko]

i have both but is pure logic that the arqc will not work because are generated from ramdom Master derivation key.. also i read from a group without kek dek mak you never will be able to clone a card with right arqc..

 

[Hijakt]

Can someone please share sda chip writer software for formatting card. I'd be so grateful. Also any chance of sharing mastercard decrypt?

Is it possible to change atr with jcop manager? Anyone know. Also I'm looking for a proper dumpz and pin url/ vendor that is genuine and trusted.

Here's the complete list of Atr, I matched my real atm card to the atr. There's lots that are for visa credit and debit but from memory only really one obvious one to be using.


https://www.eftlab.com/knowledge-base/171-atr-list-full/

If you could share

Sda by PAWS/ JCopHiroLive for formatting card before burn


If you could kindly share mastercard decrypt I'd be grateful

 

[Dlslater]

Hi

I try clone a track2 card with x2 arc 2020, then when i check in cardpeek i get error 0141 backtrace: called at string "emv.lua"

1) EMV tab then CREDIT:
track2: 4517650631796737=24082212060000000000
track1: 24082211000000206000000
Mr xxxxx xxx
VISA DEBIT
AID: 41010
CURR CODE: 0032
COUNT CODE: 0032
PIN: 1820
EFEC DATE: 201030
EXP DATE: 241030

2) IST generate:
Read card from previous card data added in EMV tab and save a IST as visa37dda

3) IST load:
I load the previous IST generated, add the data of EMV tab plus the ARQC CA3663C5AE4FF30F in arqc1, arqc2 and arqc3 (generated from Bptools)
Then BURN card and it is finished

Cardpeek give me error when i read all my cloned cards..
What is telling me error 0141 backtrace: called at string "emv.lua" ?
What steps am I doing wrong?

Please let me know if you fix this... I hit you up on telegram

 

[Ranbir Meena]

I got the exactly same issue with J40 cards also and I tried to ATM which didn’t work

thanks but is not about AID problem, could be required get J2A040 40k unfused cards and maybe match the ATR... or? Maybe all emv software is fake and not work to calculate the right ARQC?

 

[Goryoshin]

https://mega.nz/folder/RBZEUZTK#sy-PiYGtPy5gdsF1lHwDDQ

Here u find both tools

 

[pickle]

Hi I am a bit confused. So you need to make a transaction before the owner makes a transaction because it will make a new ARQC due to DDA? Wont BP tools make a new ARQC for the card so that you can use it?

 

[Goryoshin]

Yes, it is the EMV 2021 v1 version.

 

[bobbybreaksk]

Please let me know if you fix this... I hit you up on telegram

How fix