2021 WORKING emv software

[Mrloyal]

Im curious how your project concluded 10 months later ......

WATTS up u people pay 4 it BCUZ they need it & having trouble locating it... I need the software & the mcr 200 program plzzz... And a 1 dip card if u happen 2 HAVE 1...

 

[Notthisagain22]

software is free from mfr web site . not sure why u didnt know that

 

[Kidcuddi22]

software is free from mfr web site . not sure why u didnt know that

I typed in mfr website and couldn’t find anything, where exactly could I find it to download?

 

[Notthisagain22]

LOL MFR OR MFER ....MSR 200.....

 

[Mrloyal]

Top of the morning Im lookn 4 the programs if u got them can I jus get copies e-mailed 2 Me of the programs I need since they free please???

 

[Notthisagain22]

Initialize JCOP: This is called the pre-personalisation proces, that allows a simple and secure way to initialise the card for first use. The execution time depends on the used ROOT applet commands during the pre-personalization.


Supported communication protocols:

ISO/IEC 7816-3
T=1 direct convention [default]

ISO/IEC 7816-3
T=0 direct convention

ISO/IEC 7816-3
T=1 inverse convention

ISO/IEC 7816-3
T=0 inverse convention

ISO/IEC 14443-4A
T=CL


Communication speed for contact or contactless communication can be set via the baudrate:


Contacted (default clock rate is 3.5712 MHz):

9600 bit/s [Default]
19200 bit/s
38400 bit/s
57600 bit/s
115200 bit/s
223200 bit/s


Contactless:

106 kbit/s
212 kbit/s
424 kbit/s
848 kbit/s


The pre personalization process procedure goes as follow:

SELECT command with TKey
/send 00a4040010[Tkey]

BOOT
/send 00F00000

READ/WRITE command
Here you can personalize the following things:

JCRE_MODE
GP_MODE
FEATURE_MODE1
FEATURE_MODE2
JCRE_CPLC
IOCONFIG_IFSD
IOCONFIG_COLD_WTX, IOCONFIG_W
ARM_WTX, IOCONFIG_TCL_WTX
IOCONFIG_COLD_CONF, IOCONFIG_WARM_CONF
IOCONFIG_COLD_
BAUD, IOCONFIG_WARM_BAUD
IOCONFIG_COLD_IFLEN,
IOCONFIG_WARM_IFLEN
IOCONFIG_COLD_IFBYTES,
IOCONFIG_WARM_IFBYTES
IOCONFIG_COLD_HISTLEN,
IOCONFIG_WARM_HISTLEN (
IOCONFIG_COLD_HIST
CHARS, IOCONFIG_W
ARM_HISTCHARS
IOCONFIG_TCL_IFLEN
IOCONFIG_TCL_IFBYTES
IOCONFIG_TCL_CONF
CM_LIFECYCLE
CM_KEY_1, CM_KEY_2, CM_KEY_3 (
CM_KEY_1_VER, CM_KEY_2_VER, CM_KEY_3_VER
CVM_PIN

PROTECT COMMAND
/send 00100000

FUSE command
/send 0000000000


For READ/WRITE commands, you need to ask your vendor. After the pre personalization you can start using the card. Recommended is that you send a reset command after you finished the FUSE command

I WISH I HAD A CEARERRRR UNDERSTANDING OF THE COMAND LINES ....JUST LOST .........FUCK....A-LOT TRYING TO BUY SUPOSED REAL SOFTWARE....
"EMV GLOBAL WHOLE SITE IS BOGUS"

 

[luminarylol]

hi guys! i know alot of people are fustrated and in need of help & actual working software , now alot of people will sell you bullshit that doent work for cheap thinking you got a deal but in the end just puts you out of pocket! :/ well my provider has working software for $650 with full tutorial guide + 10 dump to you started! hit my telegram and i will put you in touch with the man himself and he'll add you into a group chat of over 40k+ carders all cashing out if you need further questions feel free to hit my telegram and i can put you in touch with our provider and inside the group chat where you can buy dumps + find out all information you need, have a good day! telegram>>> JLtrappo
ps. its a private server so i cant sell you it as our provider will have to verify your authorization once youve brought the software

stfu scammer

 

[Mrloyal]

I WISH I HAD A CEARERRRR UNDERSTANDING OF THE COMAND LINES ....JUST LOST .........FUCK....A-LOT TRYING TO BUY SUPOSED REAL SOFTWARE....
"EMV GLOBAL WHOLE SITE IS BOGUS"

No I haven't I need ist files & mcr 200 x2 emv tutorial right now

 

[Mrloyal]

I need ist files & mcr 200 x2 emv tutorial right now plzzz

 

[maldip]

how about EMV Foundary for Set ATR

 

[PEEMPEEN]

Exeba.com / Escan technologies

 

[Mrloyal]

Exeba.com / Escan technologies

I have ist files & atr 2.0 I need mcr200 software & drivers & the mcr200 emv tutorial video

 

[Mrloyal]

Exeba.com / Escan technologies

For WHT???

 

[Mrloyal]

how about EMV Foundary for Set ATR

I have both of them

 

[nosirname]

how do i get some good dump with pin sir

briansclub is the best bet

 

[Michael Jordian]

Is briansclub down for anybody else???

 

[Yess2022]

Is briansclub down for anybody else???

Yes mine isn't working

 

[kiwart]

Give me one week ,I will write everything how use in atm .you need
TK 2keys for jcop card T-1 unlock
Kali Linux image
VMware workstation
C++
GPSHELL
X2gold or X2 or X1 or x2arqc demo


X3-arqc foundry for veryfi IST applet before Burn
Cardpeek

everything is free

im not understand pepole why Pay for emv software ,emv software is free!!!!!



AFter when you ritch please donate disabled children
im come back after one week
take care USE Good VPN ,socks5 ,orbot,tor

Any news ?

 

[Micks]

hi guys! i know alot of people are fustrated and in need of help & actual working software , now alot of people will sell you bullshit that doent work for cheap thinking you got a deal but in the end just puts you out of pocket! :/ well my provider has working software for $650 with full tutorial guide + 10 dump to you started! hit my telegram and i will put you in touch with the man himself and he'll add you into a group chat of over 40k+ carders all cashing out if you need further questions feel free to hit my telegram and i can put you in touch with our provider and inside the group chat where you can buy dumps + find out all information you need, have a good day! telegram>>> JLtrappo
ps. its a private server so i cant sell you it as our provider will have to verify your authorization once youve brought the software

HMU tele@MicksMoney

 

[kelvinklein770]

Give me one week ,I will write everything how use in atm .you need
TK 2keys for jcop card T-1 unlock
Kali Linux image
VMware workstation
C++
GPSHELL
X2gold or X2 or X1 or x2arqc demo


X3-arqc foundry for veryfi IST applet before Burn
Cardpeek

everything is free

im not understand pepole why Pay for emv software ,emv software is free!!!!!



AFter when you ritch please donate disabled children
im come back after one week
take care USE Good VPN ,socks5 ,orbot,tor

How can I get this sir