Advanced Search

Does cloning magstrip really work especially using x2?



S

supre27

Carding Novice
Joined
17.01.25
Messages
4
Reaction score
2
Points
3
Im beginning this and doing my research on how cloning works i know emv cloning is dead and magstripe is what really works and triple dipping to use the magstripe on the atm might let you cashout but im not certain or positive I havent tried anything but i know its pretty much trial and error. I know dump sites to possibly get them off of but im just not sure if my software like the msr or x2 would really work cause i hear x2 is dead and its not and for some it works for some it doesnt. I havent tried a virtual machine yet but it does come out as a malicious file .

Any help would be great its just hard to believe whos right and whos wrong ..
 
D

dragonlove

Carding Novice
Joined
17.01.25
Messages
21
Reaction score
6
Points
3
how
zarga said:
Scratch the chip until it can't be read by Cardpeek and only write the magstrip. Then triple dip and swipe. Works for me at POS and ATM
Click to expand...
how to write the atm pin to magnetic bro ? the msr can do that work ? i tried to write with emv and msr both but sti got error with pos , any guide , thank you
 
Z

zarga

Basic
Joined
17.01.22
Messages
10
Reaction score
12
Points
3
dragonlove said:
how

how to write the atm pin to magnetic bro ? the msr can do that work ? i tried to write with emv and msr both but sti got error with pos , any guide , thank you
Click to expand...
You don't write the PIN to the magstrip. Just normal track 1 and 2. At POS put the chip in three times and then swipe. If it tells you to use the chip keep jamming the chip. Any other error, the dump is dead or you didnt write correctly. ATMs should automatically detect the dead chip and allow you to take the card out after inserting it
 
D

dragonlove

Carding Novice
Joined
17.01.25
Messages
21
Reaction score
6
Points
3
zarga said:
You don't write the PIN to the magstrip. Just normal track 1 and 2. At POS put the chip in three times and then swipe. If it tells you to use the chip keep jamming the chip. Any other error, the dump is dead or you didnt write correctly. ATMs should automatically detect the dead chip and allow you to take the card out after inserting it
Click to expand...
do x2 or any chip + pin program for work with dump + pin , i got a lot pos here but require pin for cashout , any guide bro , i tried magnetic but always require pin .
 
A

aquamega

Banned
Joined
23.12.24
Messages
34
Reaction score
11
Points
8
supre27 said:
Im beginning this and doing my research on how cloning works i know emv cloning is dead and magstripe is what really works and triple dipping to use the magstripe on the atm might let you cashout but im not certain or positive I havent tried anything but i know its pretty much trial and error. I know dump sites to possibly get them off of but im just not sure if my software like the msr or x2 would really work cause i hear x2 is dead and its not and for some it works for some it doesnt. I havent tried a virtual machine yet but it does come out as a malicious file .

Any help would be great its just hard to believe whos right and whos wrong ..
Click to expand...
inbox me bro
 
S

supre27

Carding Novice
Joined
17.01.25
Messages
4
Reaction score
2
Points
3
zarga said:
Scratch the chip until it can't be read by Cardpeek and only write the magstrip. Then triple dip and swipe. Works for me at POS and ATM
Click to expand...
So by what you mean i dont really need the x2 software because i dont need to clone the chip, i js need msr software for the magstrip and the triple dip i gotta do to swipe at an old atm huh
 
Z

zarga

Basic
Joined
17.01.22
Messages
10
Reaction score
12
Points
3
supre27 said:
So by what you mean i dont really need the x2 software because i dont need to clone the chip, i js need msr software for the magstrip and the triple dip i gotta do to swipe at an old atm huh
Click to expand...
Don't gotta be an old ATM. I tried a generic Hyosung ATM you usually find in gas stations and it worked. When it detects a bad chip it'll tell you to take the card out and it'll go like normal
 
S

supre27

Carding Novice
Joined
17.01.25
Messages
4
Reaction score
2
Points
3
zarga said:
Don't gotta be an old ATM. I tried a generic Hyosung ATM you usually find in gas stations and it worked. When it detects a bad chip it'll tell you to take the card out and it'll go like normal
Click to expand...
Alright for sure ill try im just gonna test out my own card cloned and see which atms work
 
S

supre27

Carding Novice
Joined
17.01.25
Messages
4
Reaction score
2
Points
3
supre27 said:
Alright for sure ill try im just gonna test out my own card cloned and see which atms work
Click to expand...
Do yall know what type of card will be preferred to cashout like should it be one in your region ? any examples
 
C

Cash.pierce

Banned
Joined
27.03.25
Messages
4
Reaction score
34
Points
13
dragonlove said:
do x2 or any chip + pin program for work with dump + pin , i got a lot pos here but require pin for cashout , any guide bro , i tried magnetic but always require pin .
Click to expand...
supre27 said:
Alright for sure ill try im just gonna test out my own card cloned and see which atms work
Click to expand...
With magnetic you don’t x2 or x1, want to know
 
F

faultless

Carding Novice
Joined
02.03.25
Messages
12
Reaction score
4
Points
3
Cash.pierce said:
With magnetic you don’t x2 or x1, want to know
Click to expand...
You dont need x2 or x1 to clone mags

Infact x2, x1 can't be used to clone the chip...you can only successfully clone a physical card you have cos track1, track2 isnt enough to clone a chip...if you clone it, you can see balance on the ATM but won't be able to withdraw
 
You must log in or register to reply here.
Top Bottom