How to clone



Phisher

Basic
Joined
02.02.24
Messages
25
Reaction score
5
Points
3
Note_
✓MUST HAVE X2 ARQC BPTOOL
CARDPEEK & JCOP
TO SUCCESSFULLY FORMAT & CLONE A CARD 🧪

STEPS

1. Open card peek, Click on “Analyzer” Then Choose “EMV”. That is gonna read the card and tell you if there is anything on the card that you have to erase. If there IS something that you have to delete off your card move onto step 2 but if you don’t need to delete anything you can skip to step 4 to write the card.

2. Open “JcopEnglish” Click “delete jcop files” once that is successful you can click “format jcop chip” once format is successful move to the next step.

3. Go back to “cardpeek” and analyze the card again to make sure all info on the card is gone.

4. Now you should be ready to write the card, Open the “X2emv Software” Click on “EMV”, Copy and past the card holders name into the “cardholders name” slot, make sure the name is all capitals and there is no space between the first and last name.


Now copy and paste the Track 2 into the “Track 2” Slot ( make sure you add the 5 0’s at the end of the track info). Next add the “AID” (31010), “Country Code” (840), “Currency” (USD),
*THESE CODES ONLY APPLY FOR USA *
“PIN” (Whatever the pin is that came with your dump).


Next choose your “credit” type, Then “Writer” Type, Then check all 3 boxes (“change data”). Once you have everything filled out
correctly CLICK “IST GEN AND NDME THE CLONE ! Then you can click “CREDIT” Your writing device should start blinking and that’s how you know it’s working✅.


5. Click “NFC” and fill in the blanks with the same info you used for “track 2” and “cardholders name” on the “EMV” page, Then Click “CONNECT” first, then click “BURN”. A message should pop up and say “completed job.”


6. Click on “IST Generate”, Click “Save” and name the file something you are gonna remember. Then click “Load” and open that same file you just saved.


7. Click on “IST Load” then click “Open...” and open that same file. Now fill in all the following info.. (“Track 2”, “Cardholders name”, “Country code”, Currency”), Once you are finished filling all the info in you can click “Burn”. Again the Writer should start blinking and a message should pop up saying “completed job.”


8. Go back to “IST Generate” Then click on “Generate IST” Then open the same file you saved previously, Click “yes” on the pop up, then another pop up should say “completed job.”


YOU NOW HAVE A CLONED DUMP AND CAN GO HIT THE ATM
 

Niyaa

Carding Novice
Joined
12.09.24
Messages
3
Reaction score
0
Points
1
What’s your tele I would like more information from you please.
 

Ericq

Carding Novice
Joined
16.09.24
Messages
2
Reaction score
0
Points
1
Do you have videos for newbie? I don’t have much though but i wanna make some money
 

Corey0111

Carding Novice
Joined
28.05.24
Messages
3
Reaction score
0
Points
1
What's the budget if I wanna clone my own cards?
 

Hustler.

Carding Novice
Joined
07.11.24
Messages
3
Reaction score
0
Points
1
I would be happy to purchase your service in future.
 

Phisher

Basic
Joined
02.02.24
Messages
25
Reaction score
5
Points
3
Note_
✓MUST HAVE X2 ARQC BPTOOL
CARDPEEK & JCOP
TO SUCCESSFULLY FORMAT & CLONE A CARD 🧪

STEPS

1. Open card peek, Click on “Analyzer” Then Choose “EMV”. That is gonna read the card and tell you if there is anything on the card that you have to erase. If there IS something that you have to delete off your card move onto step 2 but if you don’t need to delete anything you can skip to step 4 to write the card.

2. Open “JcopEnglish” Click “delete jcop files” once that is successful you can click “format jcop chip” once format is successful move to the next step.

3. Go back to “cardpeek” and analyze the card again to make sure all info on the card is gone.

4. Now you should be ready to write the card, Open the “X2emv Software” Click on “EMV”, Copy and past the card holders name into the “cardholders name” slot, make sure the name is all capitals and there is no space between the first and last name.


Now copy and paste the Track 2 into the “Track 2” Slot ( make sure you add the 5 0’s at the end of the track info). Next add the “AID” (31010), “Country Code” (840), “Currency” (USD),
*THESE CODES ONLY APPLY FOR USA *
“PIN” (Whatever the pin is that came with your dump).


Next choose your “credit” type, Then “Writer” Type, Then check all 3 boxes (“change data”). Once you have everything filled out
correctly CLICK “IST GEN AND NDME THE CLONE ! Then you can click “CREDIT” Your writing device should start blinking and that’s how you know it’s working✅.


5. Click “NFC” and fill in the blanks with the same info you used for “track 2” and “cardholders name” on the “EMV” page, Then Click “CONNECT” first, then click “BURN”. A message should pop up and say “completed job.”


6. Click on “IST Generate”, Click “Save” and name the file something you are gonna remember. Then click “Load” and open that same file you just saved.


7. Click on “IST Load” then click “Open...” and open that same file. Now fill in all the following info.. (“Track 2”, “Cardholders name”, “Country code”, Currency”), Once you are finished filling all the info in you can click “Burn”. Again the Writer should start blinking and a message should pop up saying “completed job.”


8. Go back to “IST Generate” Then click on “Generate IST” Then open the same file you saved previously, Click “yes” on the pop up, then another pop up should say “completed job.”


YOU NOW HAVE A CLONED DUMP AND CAN GO HIT THE ATM


Hit me up for more ideas on clone & also for cloned cards with high balance
Tele https://t.me/Da_hacks
 
Top Bottom