ATM models entering

Loveless886

Member
Joined
09.11.19
Messages
16
Reaction score
1
Points
3
This article is about standart ways to enter some ATM models.

The following are ways to enter:

Diebold CSP 200

With the terminal in the in-service mode, press the terminal maintenance switch. The Out of Service Password screen displays.
Enter the password (the default password is 626243). An asterisk appears on the screen for each character entered.
Once the password is entered, Select ENTER or press the Enter key on the numeric keypad. The Manage Passwords screen displays.” 626243

Hyosung NH5050

Press the ENTER, CLEAR, and CANCEL keys at the same time; then enter 1, 2, 3 in order.
Enter your password and press ENTER.

Hyosung MB1500

Press the CANCEL, CLEAR, ENTER key simultaneously and then press 1, 2, 3 keys in order.
Operator Password is 159951.
aster Password is 375876.
Service Password is 965733.

Hyosung MB1800

Press the CANCEL, CLEAR, ENTER key simultaneously and then press 1, 2, 3 keys in order.
Operator Password is 111111.
Master Password is 555555.
Service Password is 222222.
The factory default RMS Password is 111111.

Hyosung MB2100T 1

Change to supervisor mode by pressing highlighted switch. upper right corner
Operator Password is 222222.
Master Password is 555555.
Service Password is 111111.
The factory default RMS Password is 333333.

Hyosung NH-1800CE

To enter Supervisor mode press the ENTER, CLEAR, CANCEL, 1, 2 and 3 keys in order.
OPERATOR 111111 6 digits.
SERVICE 222222 6 digits.
MASTER 555555 6 digits.

Mandrake ecash2000

Press the CANCEL, CLEAR, ENTER key simultaneously
and then press 1,2,3 keys in order. 159951

Tranax 1700

To access the Operator Function menu, press the following keys in order <Enter>, then <Clear>, then <Cancel> then 1, then 2, then 3. 000000 000000

Tranax 1500

To access the Operator Function menu, hold the <Cancel> <Clear> and <Enter> keys simultaneously for 2 seconds release them and press 1 then press 2 then press 3.
The timing of this procedure can be difficult at first. 555555 222222

Triton 98xx 1

Press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys.
After a moment the Top Menu will be displayed.
At the Top Menu select the management area by pressing the F7 Screen Key (next to the MANAGEMENT FUNCTIONS option). 001234 00

Triton 9100

At the Customer Welcome screen, press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. After a moment the Top menu screen will be displayed.
The Top menu allows you to choose one of two options, CUSTOMER TRANSACTIONS or MANAGEMENT FUNCTIONS. Select MANAGEMENT FUNCTIONS. The password entry screen appears.
Enter the Master or Administrative password and press the <ENTER> key.
The MANAGEMENT FUNCTIONS main menu screen appears. 123456 987654

Triton RL5000

At the Customer screen press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key.
Release both keys. The password entry prompt appears.
At the password entry screen, enter the Master or Users password. 001234 00

Triton 8100

Press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. After a moment the top menu will be displayed.
At the top menu, select MANAGEMENT FUNCTIONS by pressing the key next to Management Functions option.
Enter the user password at the password entry display.” 123456 987654

Triton 9700

If the Customer Welcome screen is being displayed press and hold down the <CTRL> keywhile holding down the <CTRL> key press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.
Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.” 123456 987654

Triton RT2000

At the Customer screen press and hold down the <CTRL> key while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.
At the password entry screen, enter the Master or Users password.” 001234

Triton FT5000

At the Customer screen press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. The password entry prompt appears.
At the password entry screen enter the Master or Users password.” 001234

Triton 2000

If the Customer Welcome screen is being displayed press and hold down the <CTRL> key while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.
Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS. 123456 987654

Triton 9600

At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password.” 123456 987654

Triton RL1600

At the Customer screen , press and hold down the <CTRL> key while holding down the <CTRL> key press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password.” 123456 987654

Triton RL2000

Activate the terminal (terminal reboot) to perform customer transactions by pressing the key next to CUSTOMER TRANSACTIONS.
Enter the terminal system management area by pressing the key next to MANAGEMENT FUNCTIONS.
Note: You will have to enter an appropriate password to view the Management Functions menu. The Master password must be changed from its default
 

madison

Member
Joined
05.11.19
Messages
24
Reaction score
0
Points
1
this guy legit scammed
i got scammed for fake purchase from this guy lol
 

Loveless886

Member
Joined
09.11.19
Messages
16
Reaction score
1
Points
3
this guy legit scammed
i got scammed for fake purchase from this guy lol
I do not know why admin still allows fools like this to comment rubbish under people’s thread just to ruin it. If you have proof of what you saying why not make a blacklist against my name and get admin to banned me??? Don’t be stupid with this type of bullshit
 

madison

Member
Joined
05.11.19
Messages
24
Reaction score
0
Points
1
I do not know why admin still allows fools like this to comment rubbish under people’s thread just to ruin it. If you have proof of what you saying why not make a blacklist against my name and get admin to banned me??? Don’t be stupid with this type of bullshit
smart guy for a scam like you to go around scamming asking people wait and wait or play fake by saying BTC funds not in and sent another set of it yes proof yes i have it already reported so dont worry, screenshot provided
 

Scotty

Active member
Joined
06.12.19
Messages
27
Reaction score
0
Points
1
where these types of ATM´s can be still found? those were ATM´s used back in 2000
Thanks for the share, but your method will work probably in a museum or third-world countries, no other places to find the mentioned ATM models
 
Top Bottom