Forget EMV scam, This is how to cashout dumps + pin

[max]

Forget EMV software if you decide to cashout skimmed/hacked dumps + pin

You can't clone the emv chip, that's imposible but you can cashout out at old atms by breaking the chip , writing the magstripe and 3 dipping the atm

Your best method to cashout dumps + pin are listed below.

First get 101 code....101 code isnt chip

Now the problem is that most dump shops or vendors that claim the dumps they sell is 101, actually is 201

So you see something like this

4518421206227790=22081011469636300000

But in reality it is this below

4518421206227790=22082011469636300000


So the main sauce is to really get bins that are 101 and not 201 bins erroneously masked as 101

But even getting a real 101 code isn't enough. Cos the dump + pin may be region blocked, which means won't work in a different city or won't work in a different country or won't work in a different state etc

So the sauce is to get real 101 bins that are not region blocked

Now for 201 dumps ( chip + pin), I told you you can't clone other stolen details, the videos you see faking using emv software are either the person cloning his own real card ( not using stolen hacked skimmed data) or the person 3 dipping

break the chip so the atm has to read the mag stripe


Try 3 times with chip is gonna fail so then it takes the mag stripe

Just break the chip for 201

101s don't use chip

Yeah a few scratches with a knife will do


See image and video to get a full perspective

Now 3 dipping only works in some certain old ATMs , so the sauce is knowing those ATMs and their locations

But knowing those ATMs and their locations isn't enough, since like 101, 201 also has region block

So the sauce is knowing 201 bins that are non region blocked by default ( a customer can still inform his financial institution to region block his card or unblock it if he's going on vacation) and knowing the ATMs and the locations that 3 dip works on

Other factors are

. DEPEND OF COUNTRY WHERE ARE U BASED ... if in high risk fraudulent country

non emv atm available or not ?

AMOUNT what did you punch ?


Track 1 and Track 2 +PIN or only Track 2 u used ?..

Working BINS list changes everyday
Quality of DUMPS + pin?

 

[Roger]

What do you sell? EMV cannot replicate completely, not cannot replicate

 

[wkz]

You can actually write chip with a bit of work... You can even make the arqc dynamic... You don't know anything about EMV cloning and brag this old ass 3 dipping method that isnt even a thing in any developped country...

 

[Roger]

You can actually write chip with a bit of work... You can even make the arqc dynamic... You don't know anything about EMV cloning and brag this old ass 3 dipping method that isnt even a thing in any developped country...

A little bit of effort, for most people, is very difficult

 

[max]

You can actually write chip with a bit of work... You can even make the arqc dynamic... You don't know anything about EMV cloning and brag this old ass 3 dipping method that isnt even a thing in any developped country...

No it's impossible to clone using stolen hacked skimmed data. Unless you were fooled by rippers who cloned their personal cards and tried to fake it as cloning other cards

Impossible to clone the emv chip with just data skimmed from pos/atm
Only possible way to clone emv is only if you are cloning your own physical card

What about jcop?
You can use that to clone only your own physical card
Because your copying everything real from your own card including the previous arqc and arpc so the next one is generated automatically

But With hacked/skimmed dumps u only get magstripe info not emv info

sda, dda possible. . But you need a real physical card and transfer all emv data onto a jcop to clone

So yes only 3 dipping aka fallback works or 101 bins since they don't have chip and pin

 

[Roger]

If you can only copy your own cards, what's the difference between card data and bought data?
First, you can read your card's ATR
Second, you can read your own card's IST
Without such information, your copy card information is incomplete and cannot be used.
When you can get ATR IST you can get more information, but the duplicate card will never be the same as the original card.
EMV can replicate, just not completely.

 

[wkz]

No it's impossible to clone using stolen hacked skimmed data. Unless you were fooled by rippers who cloned their personal cards and tried to fake it as cloning other cards

Impossible to clone the emv chip with just data skimmed from pos/atm
Only possible way to clone emv is only if you are cloning your own physical card

What about jcop?
You can use that to clone only your own physical card
Because your copying everything real from your own card including the previous arqc and arpc so the next one is generated automatically

But With hacked/skimmed dumps u only get magstripe info not emv info

sda, dda possible. . But you need a real physical card and transfer all emv data onto a jcop to clone

So yes only 3 dipping aka fallback works or 101 bins since they don't have chip and pin

3 dipping and 101's just need me to moove to an other country ? thanks for that but i'll not

 

[max]

If you can only copy your own cards, what's the difference between card data and bought data?
First, you can read your card's ATR
Second, you can read your own card's IST
Without such information, your copy card information is incomplete and cannot be used.
When you can get ATR IST you can get more information, but the duplicate card will never be the same as the original card.
EMV can replicate, just not completely.

Arqc is impossible to generate, that's the problem

You would need a cards emv data, every single card in the world is different and that data changes after each transaction. People think that a ist is enough which is a complete nonsense as that ist will only work with that 1 card. You can use someone else's ist and just change tr2, that will never work


It's impossible because You would need to have a cards emv data!! not just track 2 and track1 plus pin like people sell
And remember every single card's ist is different and it changes after each transaction

 

[hatchingstained]

Arqc is impossible to generate, that's the problem

You would need a cards emv data, every single card in the world is different and that data changes after each transaction. People think that a ist is enough which is a complete nonsense as that ist will only work with that 1 card. You can use someone else's ist and just change tr2, that will never work


It's impossible because You would need to have a cards emv data!! not just track 2 and track1 plus pin like people sell
And remember every single card's ist is different and it changes after each transaction

so..dumps is dead?

 

[Peso]

is 3dip atms mainly in US?

 

[max]

so..dumps is dead?

Nope, 101 works
3 dipping for 201 works

 

[max]

is 3dip atms mainly in US?

Some are but few
Also 3dipping aka fallback can be done on specific POS too in stores

 

[Peso]

noted

 

[max]

yoo I'm looking for the 2021 1000 IST files but I've been searching for way too long, can anyone be willing to send me the files please?

Stop wasting your time looking for IST files!
Cloning 201 is impossible
Every single card had a different ist even if they are from the same bank

 

[hiawatha]

Your a nerd a lot of people still cashout dumps on emv

 

[99myways]

Hello guys. can any one pls. tell me where too get good 101 dumps + pin with authorization guaranties

 

[whoopty.woo]

Stop wasting your time looking for IST files!
Cloning 201 is impossible
Every single card had a different ist even if they are from the same ban

So when you say stop looking for IST files what do you mean? You need it to cash out, you mean like generate your own?

 

[Zerbagrillz]

FollowIng

 

[Zerbagrillz]

What about rbc temp card no chip just a mag . DEBIT card with your pin

 

[276speedy]

You can actually write chip with a bit of work... You can even make the arqc dynamic... You don't know anything about EMV cloning and brag this old ass 3 dipping method that isnt even a thing in any developped country...

Hey buddy I need track1&2 and pins for USA let me know